Flexbond-by Rosco®

Flexbond by Rosco® provides a flexible adhesive bond between many materials, such as fabrics, plastics, foams and wood. Rosco Flexbond dries to a clear, hard, yet pliable coating that does not suffer from the "tackiness" common in many other flexible glues even after those glues have had days to dry. And unlike ordinary "white" glues which can crack and break when flexed, the adhesive bond of Rosco FlexBond remains extremely pliable and strong even as the materials bend and deform. Rosco Flexbond is water- based with little fume.

For application on EVA Foam/ Thermoplastics:

We recommend applying with evenly with either a bristle brush or a sponge brush to minimize brushstrokes.

If the Flexbond is too thick it can be thinned with water. Do not add water directly to the Flexbond bottle. Mix water and Flexbond in a separate container. Adding water to the bottle will cause mold and make the Flexbond unusable.

We recommend 1-3 coats for maximum smoothness.

Allow to fully dry between coats and watch for any drips/ runs.

 

Flexbond cannot be sanded. 

Store in a climate controlled area, Flexbond will become unusable if frozen. 

 

Product is available in 16 or 32 oz