Flexi Filler® – (seam and gap filler for EVA foam, Cosplay, LARP, costumes, and props)
- Unit price
- / per
Flexi Filler® is an extremely versatile rubber-like putty used to fill seams, creases, or small potholes in EVA foam for Cosplay, LARP, costumes, and props.
Flexi Filler® comes in a round 3.5oz pot and is typically applied with a finger or silicone spreader. When dry it gives a uniform appearance to the surface of EVA Foam.
If applying by finger, we recommend wetting your finger with water and smoothing out the putty into the area you want to fill.
A spreader is typically used for a larger repair. Once applied, let your Flexi Filler® fully dry and then wet sand for a smooth, flexible finish!
Flexi Filler® is nontoxic, latex free, breaking/cracking resistant, flexible, durable, bonds strongly to EVA Foam, and requires no mixing or alcohol thinners.
While Flexi Filler® is an excellent material for small, cosmetic repairs, we do not recommend its use as a general surface/primer coat. (For that we recommend our Cosflex Prime and Seal® or Flexbond by Rosco®) It is also not recommended for areas that experience heavy strain/ wear and require high durability.
Available in Black, 3.5 oz
For application on EVA Foam/ Thermoplastics: We recommend applying Cosflex evenly with either a bristle brush or a sponge brush to minimize brushstrokes. If the Cosflex is too thick it can be thinned with water. Do not add water directly to the Cosflex bottle. Mix water and Cosflex in a separate container. Adding water to the bottle will cause mold and make the Cosflex unusable. We recommend 1-3 coats for maximum smoothness. Allow to fully dry between coats and watch for any drips/ runs.
Cosflex can be gently wet-sanded using a fine grit sandpaper.
Important Disclaimer: Please note that if shipped during the Winter. If frozen, Cosflex will become unusable. In an effort to prevent this, based on the predicted weather in your area, you may be contacted to upgrade your shipping to next day delivery.
Flexi Filler® – (seam and gap filler for EVA foam, Cosplay, LARP, costumes, and props)
- Unit price
- / per
Adding product to your cart
You may also like
Flexi Filler® is an extremely versatile rubber-like putty used to fill seams, creases, or small potholes in EVA foam for Cosplay, LARP, costumes, and props.
Flexi Filler® comes in a round 3.5oz pot and is typically applied with a finger or silicone spreader. When dry it gives a uniform appearance to the surface of EVA Foam.
If applying by finger, we recommend wetting your finger with water and smoothing out the putty into the area you want to fill.
A spreader is typically used for a larger repair. Once applied, let your Flexi Filler® fully dry and then wet sand for a smooth, flexible finish!
Flexi Filler® is nontoxic, latex free, breaking/cracking resistant, flexible, durable, bonds strongly to EVA Foam, and requires no mixing or alcohol thinners.
While Flexi Filler® is an excellent material for small, cosmetic repairs, we do not recommend its use as a general surface/primer coat. (For that we recommend our Cosflex Prime and Seal® or Flexbond by Rosco®) It is also not recommended for areas that experience heavy strain/ wear and require high durability.
Available in Black, 3.5 oz
For application on EVA Foam/ Thermoplastics: We recommend applying Cosflex evenly with either a bristle brush or a sponge brush to minimize brushstrokes. If the Cosflex is too thick it can be thinned with water. Do not add water directly to the Cosflex bottle. Mix water and Cosflex in a separate container. Adding water to the bottle will cause mold and make the Cosflex unusable. We recommend 1-3 coats for maximum smoothness. Allow to fully dry between coats and watch for any drips/ runs.
Cosflex can be gently wet-sanded using a fine grit sandpaper.
Important Disclaimer: Please note that if shipped during the Winter. If frozen, Cosflex will become unusable. In an effort to prevent this, based on the predicted weather in your area, you may be contacted to upgrade your shipping to next day delivery.
You may also like
You may also like
Customer Reviews
The Cosflex was perfect! It goes perfectly over L-200 FOAM, still need to test paint over it but it’s exactly what I needed.
Fast shipping, exactly what I need for my foam and easier to get compared to Blick's
Great product, haven’t found anything else on the market that compares.
Dried fairly quickly, resilient, and for my first time using primer, I was super impressed.
Best primer for foam clay! doesn't crack at all!