Coscom - Grade A EVA 38 foam Spheres (Black) - (Small 30 mm, or Large 40 mm) - (Sold in Packs of 3 or 6)
- Unit price
- / per
Our EVA 38 Foam Spheres are an industry standard density, similar to those of other leading EVA foam suppliers. They are available in 30 mm and 40 mm sizes. These spheres are perfect for accessories, accents or for use in prop building.
Choosing the right kind of EVA foam for your project is important. It should be the right density, smooth, tear resistant, require minimal priming, and have reduced surface imperfections/pits. Our grade A EVA-38 foam balls have been throughly tested and manufactured for best results.
Available in Black.
Also Check Out Our Eva38 Foam Cones (Click Here To View)
For application on EVA Foam/ Thermoplastics: We recommend applying Cosflex evenly with either a bristle brush or a sponge brush to minimize brushstrokes. If the Cosflex is too thick it can be thinned with water. Do not add water directly to the Cosflex bottle. Mix water and Cosflex in a separate container. Adding water to the bottle will cause mold and make the Cosflex unusable. We recommend 1-3 coats for maximum smoothness. Allow to fully dry between coats and watch for any drips/ runs.
Cosflex can be gently wet-sanded using a fine grit sandpaper.
Important Disclaimer: Please note that if shipped during the Winter. If frozen, Cosflex will become unusable. In an effort to prevent this, based on the predicted weather in your area, you may be contacted to upgrade your shipping to next day delivery.
Coscom - Grade A EVA 38 foam Spheres (Black) - (Small 30 mm, or Large 40 mm) - (Sold in Packs of 3 or 6)
- Unit price
- / per
Adding product to your cart
You may also like
Our EVA 38 Foam Spheres are an industry standard density, similar to those of other leading EVA foam suppliers. They are available in 30 mm and 40 mm sizes. These spheres are perfect for accessories, accents or for use in prop building.
Choosing the right kind of EVA foam for your project is important. It should be the right density, smooth, tear resistant, require minimal priming, and have reduced surface imperfections/pits. Our grade A EVA-38 foam balls have been throughly tested and manufactured for best results.
Available in Black.
Also Check Out Our Eva38 Foam Cones (Click Here To View)
For application on EVA Foam/ Thermoplastics: We recommend applying Cosflex evenly with either a bristle brush or a sponge brush to minimize brushstrokes. If the Cosflex is too thick it can be thinned with water. Do not add water directly to the Cosflex bottle. Mix water and Cosflex in a separate container. Adding water to the bottle will cause mold and make the Cosflex unusable. We recommend 1-3 coats for maximum smoothness. Allow to fully dry between coats and watch for any drips/ runs.
Cosflex can be gently wet-sanded using a fine grit sandpaper.
Important Disclaimer: Please note that if shipped during the Winter. If frozen, Cosflex will become unusable. In an effort to prevent this, based on the predicted weather in your area, you may be contacted to upgrade your shipping to next day delivery.
You may also like
You may also like
Customer Reviews
The Cosflex was perfect! It goes perfectly over L-200 FOAM, still need to test paint over it but it’s exactly what I needed.
Fast shipping, exactly what I need for my foam and easier to get compared to Blick's
Great product, haven’t found anything else on the market that compares.
Dried fairly quickly, resilient, and for my first time using primer, I was super impressed.
Best primer for foam clay! doesn't crack at all!